The Main Components of machine

Pay-off machine for D800 bobbin → Dancer frame → Take up machine (Including the Straightener, Traction and feeding capstan, Flying wheel, Rotation table up/down and vibrating device, Drum expulse device) → Electrical control system - PLC

Specification

1) Wire Dia.: Φ0.8mm~Φ1.6mm (The ellipticity of wire Dia. ≤0.005).

2) Speed: the design speed is 15m/s, and the natural working speed is 10-12m/s, the actual working speed is affected by wire diameter and linearity.

3) The seemly specification of paper drum:Φ510mm×400mm (Dia. × height), the packing weight of wire is 0-100Kg (solid welding wire)Φ510mm×800mm (Dia. × height), the packing weight of wire is 0-250Kg (solid welding wire)Φ660mm×750mm (Dia. × height), the packing weight of wire is 0-350Kg (solid welding wire).

4) Traction and feeding capstan: Dia. is Φ560mm, horizontal installation (Horizontal installation of capstan shaft).

5) Wire feeding mode: belt wrapped wire on capstan.

6) Air pressure requirement: ≥0.5MPa.

7) Power: 32KW (The actual working power is about 6KW).

8) Space: 10000*2400*4300mm (Length*width*height), Dimensions of which equipment: 8000*2200*3800mm (Length*width*height).

9) Weight: about 6T.